Test case for the most important water values in freshwater aquariums including an ammonium test.
Simple and safe control of the water values ??in aquariums. Determination of: pH value, carbonate hardness, nitrite, nitrate and additionally ammonium / ammonia, as well as CO2 calculation using a table
Easy to use: Pour aquarium water into a cuvette with a syringe, add the indicator and compare the color with the color scale or count the drops in the KH test until the color changes
The comparator system takes account of the inherent color of the water. The CO2 content is determined using the pH value and KH value in a table
Child-proof reagent bottles, waterproof plastic case, refill reagents available separately
Scope of delivery: 1 test case for aquariums. 9 reagents, 3 glass cuvettes, syringe, measuring spoon, comparator block, plastic cuvette, color cards, protocol sheets, operating instructions
Healthy aquariums with conditions close to nature The right water values are dependent on the fish stock and the plants in the aquarium. Even if the water looks clear it can be contaminated. Bad values can cause diseases or algae in the aquarium. To maintain a healthy aquarium with conditions close to nature it is important to check and adapt the water values regularly. With JBL water tests you can determine all relevant water values quickly, easily and very precisely.
The following tests are included in the set: pH test: acidity of the water from 3.0 to 10 To determine the CO2 content, it is sufficient to measure the pH and KH. These two values determine the CO2 content of the water, which can then be found in the enclosed table. KH test: pH stability of the water (carbonate hardness) NO2 test: determination of nitrogen compound nitrite, which is toxic for the fish NO3-Test: determination of the nitrate content (reason for algae growth and plant nutrient) Test NH4 / NH3: indication of non-toxic ammonium, determination of the toxic ammonia using table
The following tests are available as supplements: pH test: acidity of the water from 6.0 to 7.6 pH test: acidity of the water from 7.4 to 9.0 O2 test: determination of the oxygen content CO2 Direct test: determination of the current carbon dioxide content for thriving plant growth Fe test: determination of the iron content to monitor the fertilisation GH test: determination of general hardness PO4 test: determination of the phosphate content (reason for algae growth and plant nutrient) Cu Test: heavy metal deadly for invertebrates. Also important for adjusting the therapeutic dose of medications SiO2 test: determination of the silicates (silicic acid) as cause for diatoms
Attention! Danger!
EUH031: Contact with acids liberates toxic gas. H225: Highly flammable liquid and vapour. H314: Causes severe skin burns and eye damage. H317: May cause an allergic skin reaction. H318: Causes serious eye damage. H336: May cause drowsiness or dizziness. H341: Suspected of causing genetic defects. H400: Very toxic to aquatic life. H411: Toxic to aquatic life with long lasting effects.
P101: If medical advice is needed, have product container or label at hand. P102: Keep out of reach of children. P303+P361+P353: IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water [or shower]. P305+P351+P338: IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. P501a: Dispose of contents/container in accordance with local regulations.
We use cookies on our website. Below you can choose whether and, if so, which non-essential cookies you would like to accept and you will receive further information about this.
