Oceamo Corrector Set
EUR 99,90
incl. VAT excl. shipping costs
Available at permanent low price!
product description
Oceamo Corrector Set
The novel system for the production of Oceamo seawater as a set. Consisting of 10000 ml Corrector ZERO with tap, the 3 modifiers: 1000 ml Corrector Modifier KH, 1000 ml Corrector Modifier Potassium, 1000 ml Corrector Modifier Calcium. Also included is the 250ml Oceamo measuring cylinder, which is ideal for dosing the modifiers.
- 10000 ml Corrector ZERO (sufficient for 100 l seawater)
- Withdrawal tap
- 1000 ml Corrector Modifier Calcium (sufficient for 400 l seawater)
- 1000 ml Corrector Modifier Potassium (sufficient for 400 l seawater)
- 1000 ml Corrector Modifier KH (sufficient for 400 l seawater)
- Measuring cylinder 250 ml
The Oceamo Corrector Set offers you:
New filling for aquariums: Best possible start with optimal parameters!
Effective and fast correction of increased water values (Ca, KH, K) by small water changes.
Water changes with desired parameters: Prevent fluctuations!
Optimal trace element profile: Even ultra-trace elements optimally balanced based on ICP-MS measurements, homogeneous and reproducible from batch to batch.
No elevated manganese and iron levels as with a variety of sea salts
Produced out of high purity pharmaceutical salts
High efficiency due to 10-fold concentrate
Highest possible safety regarding heavy metals
How is Oceamo Corrector mixed?
- The 10-fold concentrate Oceamo Corrector ZERO is mixed with osmosis water. To produce 100l seawater, 10 l (corresponding to 12 kg) Corrector ZERO and 90 l of high quality osmosis water are needed.
- Then the desired parameters of calcium, KH and potassium are set with the Corrector modifiers. To produce optimal seawater, 250 ml of each modifier is necessary for 100 l of finished seawater. Thus, 425 mg/l of calcium, an alkalinity of 7.5 dKH and 390 mg/l of potassium are adjusted.
- The measuring of the modifier can be done with a measuring cylinder or a syringe (depending on the required volume). It is important to rinse the measuring cylinder (or syringe) with osmosis water in between, as the different modifier solutions form precipitates on direct contact. The seawater should also always be mixed well when adding the modifier (e.g. using a flow pump).
What is the elemental composition of Oceamo Corrector?
Oceamo Corrector is produced "ICP-MS guided": This gives us full control down to very low concentration ranges (ultra trace elements). The typical composition concerning bulk and trace elements is:
0 Reviews