AutoAqua Smart ATO nano
EUR 65,59
incl. VAT excl. shipping costs
Available at permanent low price!
product description
AutoAqua Smart ATO nano
Discover innovation and ease of use.
A stable osmotic balance is important for small nano and pico aquariums under 200 liters, as they are particularly sensitive to the constant fluctuations in salt concentrations. For this reason, Smart ATO Nano was specially developed by AutoAqua.
Smart ATO Nano is easy to install and operates silently. A powerful diaphragm pump and a dual optical sensor are combined in a single housing. Thus, there are no cables in your aquarium, maintaining a neat and safe appearance!
Smart ATO Nano comes with two important and clever accessories:
- A pre-filter
- An anti-siphon valve
The first filter removes particles from the aquarium and the second filter protects the pump and stops the flow of water caused by a possible siphon.
Technical specifications:
Power supply:
- Input: 100-240 VAC 50-60 Hz
- Output: 12 VDC / 1A
- Power cable length: 6 ft (180 cm)
Diaphragm pump :
- Suction height: 6.5 ft (200 cm)
- Flow rate: 7.9 gph (30 lph)
Max. mounting thickness Mounting thickness:
- Sensor: 1/2 inch (12.7 mm)
- Bracket: 3-10 mm (0.12-0.39 in)
Anti-siphon valve :
- Anti-siphon pressure: 2 feet (60 cm)
- Sensor cable length: 1.5 feet (45 cm)
Hose :
- Length: 6.5 feet (200 cm)
- Inner diameter: 4 mm / Outer diameter: 6.4 mm
Compact and all in one
By integrating a dual sensor and a diaphragm pump, Smart ATO Nano is extremely easy to install on the aquarium: Hang the unit on the side wall of the tank or technical basin, connect the hoses and connect the power supply. In addition, the cable length of the sensor is adjustable, so you can hide the excess in the housing!
Intelligent Security Technology QST
The unique Quick Security Technology (QST) detects sensor or pump failure and immediately prevents overflow without the need for complicated adjustments. Thanks to the intuitive LED display, the status can be seen at a glance.
Screwless, quick disassembly.
The screwless design allows assembly and disassembly within one minute. Since there are no screws, there's also no risk of rusting the aquarium!
Easy installation and versatile mounting positions.
The "Hang-On Back" design is practical and flexible for aquariums/basins with or without rims. The easy-to-install magnetic dual sensor can be positioned in any desired location. The adjustable mount is suitable for aquarium glass thicknesses from 3 to 10 mm.
0 Reviews