Microbe-Lift Premium Reef Salt
EUR 8,90 - EUR 79,90
excl. heavy cargo surcharge
incl. VAT excl. shipping costs
Available at permanent low price!
product description
Microbe-Lift Premium Reef Salt
We are proud to introduce our first product that was developed and produced in Germany.
Our new PREMIUM REEF SALT (Premium reef sea salt) is manufactured to the highest quality, quality and purity.
With a new formula and mix we achieve water values, that meet even the highest expectations. We are sure that this salt will revolutionize the market.
Here are the facts:
• New formula
• Suitable even for sensitive species
• Very fast dissoulution and usability
• Dissolves crystal clear
• Phosphate and nitrate-free
• Contains all essential trace elements
• Balanced ratio of calcium and magnesium
• Contains only natural ingredients
• High consistent quality
• ingredients in purity according to the European Pharmacopoeia
• pH value from 8.3 to 8.5
• calcium content of about 420 mg / L
• Magnesium content of about 1368 mg / L
• Strontium about 8.1 mg / L
• Strictest control and quality management in accordance with relevant German and European directives and standards
• Made in Germany
(All parameters at a density of 1.022 at a water temperature of 25 ° Celsius dissolved in RO water)
Content: 10kg (about 280 liters) or 20kg (approx 560 liters)
Our special salt mixture prevents precipitation of calcium and promotes along with magnesium and other ingredients rapid growth of coralline algae. Even the most sensitive fish and coral thrive. During a new start, as well as water changes, we recommend that you use the salt together with MICROBE-LIFT Nite-out II and Special Blend. For the additional supply of trace elements, use our custom MICROBE-LIFT REEF & MARINE series or MICROBE-LIFT All-In-One.
Note:
36 g dissolved in 1000 ml of deionized water at 25 ° C gives approximately the following values:
• Density 1.022
• pH value from 8.3 to 8.5
• KH approximately 8 ° - 10 ° dKH
• calcium content of about 420 mg / L
• Magnesium content of about 1368 mg / L
• Strontium about 8.1 mg / L
Instructions for use:
Dissolve the required amount of salt in osmosis water with water movement. After a short time the water is clear and can be used. The salt density should be between 1,022 - 1,025 at a temperature of 25 ° C. We recommend a 5% to 10% water change every 1-2 weeks.
0 Reviews